Contract 0xc975aceab083118c5f0fc215ab7d7ecc99e52daf

/**
 *Submitted for verification at basescan.org on 2024-04-10
*/

// File: @openzeppelin/contracts/utils/Nonces.sol
// Compatible with OpenZeppelin Contracts ^5.0.0
// Jackpot Token
// WWW.betaltcoins.com
// Jackpot token is a digital currency powering decentralized betting platforms. With smart contract technology, it ensures transparency and fairness in betting processes. 
// Users can place bets across various events, sports, and games securely. Jackpot token facilitates efficient transactions and rewards users for participating in the decentralized ecosystem

// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// File: @openzeppelin/contracts/interfaces/IERC5267.sol


// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// File: @openzeppelin/contracts/utils/StorageSlot.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// File: @openzeppelin/contracts/utils/ShortStrings.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;


// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// File: @openzeppelin/contracts/utils/math/SignedMath.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;



/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// File: @openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;


/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// File: @openzeppelin/contracts/utils/cryptography/EIP712.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;




/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// File: @openzeppelin/contracts/utils/cryptography/ECDSA.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol


// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;






/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.20;



/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}

// File: Jackpot.sol
// Compatible with OpenZeppelin Contracts ^5.0.0
// Jackpot
// WWW.betaltcoins.com
// Jackpot token is a digital currency powering decentralized betting platforms. With smart contract technology, it ensures transparency and fairness in betting processes. 
// Users can place bets across various events, sports, and games securely. Jackpot token facilitates efficient transactions and rewards users for participating in the decentralized ecosystem.
pragma solidity ^0.8.20;
contract Jackpot is ERC20, ERC20Burnable, ERC20Permit, Ownable {
    constructor(address initialOwner)
        ERC20("Jackpot", "JACKPOT")
        ERC20Permit("Jackpot")
        Ownable(initialOwner)
    {
        _mint(msg.sender, 1000000000 * 10 ** decimals());
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialOwner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000ceaeb8d1844a1570e72a5df6d425afe4943edefa

-----Decoded View---------------
Arg [0] : initialOwner (address): 0xCEaEB8D1844a1570e72A5df6D425afe4943EDefa

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000ceaeb8d1844a1570e72a5df6d425afe4943edefa

83850:279:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;70194:91;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;72487:190;;;;;;:::i;:::-;;:::i;:::-;;;1269:14:1;;1262:22;1244:41;;1232:2;1217:18;72487:190:0;1104:187:1;71296:99:0;71375:12;;71296:99;;;1442:25:1;;;1430:2;1415:18;71296:99:0;1296:177:1;73255:249:0;;;;;;:::i;:::-;;:::i;71147:84::-;;;71221:2;1953:36:1;;1941:2;1926:18;71147:84:0;1811:184:1;82047:114:0;;;:::i;82763:89::-;;;;;;:::i;:::-;;:::i;:::-;;71458:118;;;;;;:::i;:::-;-1:-1:-1;;;;;71550:18:0;71523:7;71550:18;;;;;;;;;;;;71458:118;63807:103;;;:::i;83181:161::-;;;;;;:::i;:::-;;:::i;81789:145::-;;;;;;:::i;:::-;;:::i;40319:580::-;;;:::i;:::-;;;;;;;;;;;;;:::i;63132:87::-;63205:6;;63132:87;;-1:-1:-1;;;;;63205:6:0;;;3968:51:1;;3956:2;3941:18;63132:87:0;3822:203:1;70404:95:0;;;:::i;71781:182::-;;;;;;:::i;:::-;;:::i;81035:695::-;;;;;;:::i;:::-;;:::i;72026:142::-;;;;;;:::i;:::-;-1:-1:-1;;;;;72133:18:0;;;72106:7;72133:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;72026:142;64065:220;;;;;;:::i;:::-;;:::i;70194:91::-;70239:13;70272:5;70265:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;70194:91;:::o;72487:190::-;72560:4;61221:10;72616:31;61221:10;72632:7;72641:5;72616:8;:31::i;:::-;72665:4;72658:11;;;72487:190;;;;;:::o;73255:249::-;73342:4;61221:10;73400:37;73416:4;61221:10;73431:5;73400:15;:37::i;:::-;73448:26;73458:4;73464:2;73468:5;73448:9;:26::i;:::-;-1:-1:-1;73492:4:0;;73255:249;-1:-1:-1;;;;73255:249:0:o;82047:114::-;82106:7;82133:20;:18;:20::i;:::-;82126:27;;82047:114;:::o;82763:89::-;82818:26;61221:10;82838:5;82818;:26::i;:::-;82763:89;:::o;63807:103::-;63018:13;:11;:13::i;:::-;63872:30:::1;63899:1;63872:18;:30::i;:::-;63807:103::o:0;83181:161::-;83257:45;83273:7;61221:10;83296:5;83257:15;:45::i;:::-;83313:21;83319:7;83328:5;83313;:21::i;:::-;83181:161;;:::o;81789:145::-;-1:-1:-1;;;;;1121:14:0;;81880:7;1121:14;;;:7;:14;;;;;;81907:19;1034:109;40319:580;40422:13;40450:18;40483:21;40519:15;40549:25;40589:12;40616:27;40724:13;:11;:13::i;:::-;40752:16;:14;:16::i;:::-;40864;;;40847:1;40864:16;;;;;;;;;-1:-1:-1;;;40671:220:0;;;-1:-1:-1;40671:220:0;;-1:-1:-1;40783:13:0;;-1:-1:-1;40819:4:0;;-1:-1:-1;40847:1:0;-1:-1:-1;40864:16:0;-1:-1:-1;40671:220:0;-1:-1:-1;40319:580:0:o;70404:95::-;70451:13;70484:7;70477:14;;;;;:::i;71781:182::-;71850:4;61221:10;71906:27;61221:10;71923:2;71927:5;71906:9;:27::i;81035:695::-;81265:8;81247:15;:26;81243:99;;;81297:33;;-1:-1:-1;;;81297:33:0;;;;;1442:25:1;;;1415:18;;81297:33:0;;;;;;;;81243:99;81354:18;80355:95;81413:5;81420:7;81429:5;81436:16;81446:5;-1:-1:-1;;;;;1631:14:0;1324:7;1631:14;;;:7;:14;;;;;:16;;;;;;;;;1264:402;81436:16;81385:78;;;;;;5797:25:1;;;;-1:-1:-1;;;;;5896:15:1;;;5876:18;;;5869:43;5948:15;;;;5928:18;;;5921:43;5980:18;;;5973:34;6023:19;;;6016:35;6067:19;;;6060:35;;;5769:19;;81385:78:0;;;;;;;;;;;;81375:89;;;;;;81354:110;;81477:12;81492:28;81509:10;81492:16;:28::i;:::-;81477:43;;81533:14;81550:28;81564:4;81570:1;81573;81576;81550:13;:28::i;:::-;81533:45;;81603:5;-1:-1:-1;;;;;81593:15:0;:6;-1:-1:-1;;;;;81593:15:0;;81589:90;;81632:35;;-1:-1:-1;;;81632:35:0;;-1:-1:-1;;;;;6336:15:1;;;81632:35:0;;;6318:34:1;6388:15;;6368:18;;;6361:43;6253:18;;81632:35:0;6106:304:1;81589:90:0;81691:31;81700:5;81707:7;81716:5;81691:8;:31::i;:::-;81232:498;;;81035:695;;;;;;;:::o;64065:220::-;63018:13;:11;:13::i;:::-;-1:-1:-1;;;;;64150:22:0;::::1;64146:93;;64196:31;::::0;-1:-1:-1;;;64196:31:0;;64224:1:::1;64196:31;::::0;::::1;3968:51:1::0;3941:18;;64196:31:0::1;3822:203:1::0;64146:93:0::1;64249:28;64268:8;64249:18;:28::i;77314:130::-:0;77399:37;77408:5;77415:7;77424:5;77431:4;77399:8;:37::i;:::-;77314:130;;;:::o;79030:487::-;-1:-1:-1;;;;;72133:18:0;;;79130:24;72133:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;-1:-1:-1;;79197:37:0;;79193:317;;79274:5;79255:16;:24;79251:132;;;79307:60;;-1:-1:-1;;;79307:60:0;;-1:-1:-1;;;;;6635:32:1;;79307:60:0;;;6617:51:1;6684:18;;;6677:34;;;6727:18;;;6720:34;;;6590:18;;79307:60:0;6415:345:1;79251:132:0;79426:57;79435:5;79442:7;79470:5;79451:16;:24;79477:5;79426:8;:57::i;:::-;79119:398;79030:487;;;:::o;73889:308::-;-1:-1:-1;;;;;73973:18:0;;73969:88;;74015:30;;-1:-1:-1;;;74015:30:0;;74042:1;74015:30;;;3968:51:1;3941:18;;74015:30:0;3822:203:1;73969:88:0;-1:-1:-1;;;;;74071:16:0;;74067:88;;74111:32;;-1:-1:-1;;;74111:32:0;;74140:1;74111:32;;;3968:51:1;3941:18;;74111:32:0;3822:203:1;74067:88:0;74165:24;74173:4;74179:2;74183:5;74165:7;:24::i;38986:268::-;39039:7;39071:4;-1:-1:-1;;;;;39080:11:0;39063:28;;:63;;;;;39112:14;39095:13;:31;39063:63;39059:188;;;-1:-1:-1;39150:22:0;;38986:268::o;39059:188::-;39212:23;39354:80;;;37178:95;39354:80;;;7251:25:1;39376:11:0;7292:18:1;;;7285:34;;;;39389:14:0;7335:18:1;;;7328:34;39405:13:0;7378:18:1;;;7371:34;39428:4:0;7421:19:1;;;7414:61;39317:7:0;;7223:19:1;;39354:80:0;;;;;;;;;;;;39344:91;;;;;;39337:98;;39262:181;;76550:211;-1:-1:-1;;;;;76621:21:0;;76617:91;;76666:30;;-1:-1:-1;;;76666:30:0;;76693:1;76666:30;;;3968:51:1;3941:18;;76666:30:0;3822:203:1;76617:91:0;76718:35;76726:7;76743:1;76747:5;76718:7;:35::i;63297:166::-;63205:6;;-1:-1:-1;;;;;63205:6:0;61221:10;63357:23;63353:103;;63404:40;;-1:-1:-1;;;63404:40:0;;61221:10;63404:40;;;3968:51:1;3941:18;;63404:40:0;3822:203:1;64445:191:0;64538:6;;;-1:-1:-1;;;;;64555:17:0;;;-1:-1:-1;;;;;;64555:17:0;;;;;;;64588:40;;64538:6;;;64555:17;64538:6;;64588:40;;64519:16;;64588:40;64508:128;64445:191;:::o;41228:128::-;41274:13;41307:41;:5;41334:13;41307:26;:41::i;41691:137::-;41740:13;41773:47;:8;41803:16;41773:29;:47::i;40085:178::-;40162:7;40189:66;40222:20;:18;:20::i;:::-;40244:10;34990:4;34984:11;-1:-1:-1;;;35009:23:0;;35062:4;35053:14;;35046:39;;;;35115:4;35106:14;;35099:34;35172:4;35157:20;;;34785:410;48825:264;48910:7;48931:17;48950:18;48970:16;48990:25;49001:4;49007:1;49010;49013;48990:10;:25::i;:::-;48930:85;;;;;;49026:28;49038:5;49045:8;49026:11;:28::i;:::-;-1:-1:-1;49072:9:0;;48825:264;-1:-1:-1;;;;;;48825:264:0:o;78295:443::-;-1:-1:-1;;;;;78408:19:0;;78404:91;;78451:32;;-1:-1:-1;;;78451:32:0;;78480:1;78451:32;;;3968:51:1;3941:18;;78451:32:0;3822:203:1;78404:91:0;-1:-1:-1;;;;;78509:21:0;;78505:92;;78554:31;;-1:-1:-1;;;78554:31:0;;78582:1;78554:31;;;3968:51:1;3941:18;;78554:31:0;3822:203:1;78505:92:0;-1:-1:-1;;;;;78607:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;:35;;;78653:78;;;;78704:7;-1:-1:-1;;;;;78688:31:0;78697:5;-1:-1:-1;;;;;78688:31:0;;78713:5;78688:31;;;;1442:25:1;;1430:2;1415:18;;1296:177;78688:31:0;;;;;;;;78295:443;;;;:::o;74521:1135::-;-1:-1:-1;;;;;74611:18:0;;74607:552;;74765:5;74749:12;;:21;;;;;;;:::i;:::-;;;;-1:-1:-1;74607:552:0;;-1:-1:-1;74607:552:0;;-1:-1:-1;;;;;74825:15:0;;74803:19;74825:15;;;;;;;;;;;74859:19;;;74855:117;;;74906:50;;-1:-1:-1;;;74906:50:0;;-1:-1:-1;;;;;6635:32:1;;74906:50:0;;;6617:51:1;6684:18;;;6677:34;;;6727:18;;;6720:34;;;6590:18;;74906:50:0;6415:345:1;74855:117:0;-1:-1:-1;;;;;75095:15:0;;:9;:15;;;;;;;;;;75113:19;;;;75095:37;;74607:552;-1:-1:-1;;;;;75175:16:0;;75171:435;;75341:12;:21;;;;;;;75171:435;;;-1:-1:-1;;;;;75557:13:0;;:9;:13;;;;;;;;;;:22;;;;;;75171:435;75638:2;-1:-1:-1;;;;;75623:25:0;75632:4;-1:-1:-1;;;;;75623:25:0;;75642:5;75623:25;;;;1442::1;;1430:2;1415:18;;1296:177;75623:25:0;;;;;;;;74521:1135;;;:::o;10374:273::-;10468:13;8320:66;10498:46;;10494:146;;10568:15;10577:5;10568:8;:15::i;:::-;10561:22;;;;10494:146;10623:5;10616:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47130:1556;47261:7;;;48204:66;48191:79;;48187:166;;;-1:-1:-1;48303:1:0;;-1:-1:-1;48307:30:0;;-1:-1:-1;48339:1:0;48287:54;;48187:166;48467:24;;;48450:14;48467:24;;;;;;;;;7713:25:1;;;7786:4;7774:17;;7754:18;;;7747:45;;;;7808:18;;;7801:34;;;7851:18;;;7844:34;;;48467:24:0;;7685:19:1;;48467:24:0;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;48467:24:0;;-1:-1:-1;;48467:24:0;;;-1:-1:-1;;;;;;;48506:20:0;;48502:115;;-1:-1:-1;48559:1:0;;-1:-1:-1;48563:29:0;;-1:-1:-1;48559:1:0;;-1:-1:-1;48543:62:0;;48502:115;48637:6;-1:-1:-1;48645:20:0;;-1:-1:-1;48645:20:0;;-1:-1:-1;47130:1556:0;;;;;;;;;:::o;49227:542::-;49323:20;49314:5;:29;;;;;;;;:::i;:::-;;49310:452;;49227:542;;:::o;49310:452::-;49421:29;49412:5;:38;;;;;;;;:::i;:::-;;49408:354;;49474:23;;-1:-1:-1;;;49474:23:0;;;;;;;;;;;49408:354;49528:35;49519:5;:44;;;;;;;;:::i;:::-;;49515:247;;49587:46;;-1:-1:-1;;;49587:46:0;;;;;1442:25:1;;;1415:18;;49587:46:0;1296:177:1;49515:247:0;49664:30;49655:5;:39;;;;;;;;:::i;:::-;;49651:111;;49718:32;;-1:-1:-1;;;49718:32:0;;;;;1442:25:1;;;1415:18;;49718:32:0;1296:177:1;9029:415:0;9088:13;9114:11;9128:16;9139:4;9128:10;:16::i;:::-;9254:14;;;9265:2;9254:14;;;;;;;;;9114:30;;-1:-1:-1;9234:17:0;;9254:14;;;;;;;;;-1:-1:-1;;;9347:16:0;;;-1:-1:-1;9393:4:0;9384:14;;9377:28;;;;-1:-1:-1;9347:16:0;9029:415::o;9521:251::-;9582:7;9655:4;9619:40;;9683:2;9674:11;;9670:71;;;9709:20;;-1:-1:-1;;;9709:20:0;;;;;;;;;;;14:423:1;56:3;94:5;88:12;121:6;116:3;109:19;146:1;156:162;170:6;167:1;164:13;156:162;;;232:4;288:13;;;284:22;;278:29;260:11;;;256:20;;249:59;185:12;156:162;;;160:3;363:1;356:4;347:6;342:3;338:16;334:27;327:38;426:4;419:2;415:7;410:2;402:6;398:15;394:29;389:3;385:39;381:50;374:57;;;14:423;;;;:::o;442:220::-;591:2;580:9;573:21;554:4;611:45;652:2;641:9;637:18;629:6;611:45;:::i;:::-;603:53;442:220;-1:-1:-1;;;442:220:1:o;667:173::-;735:20;;-1:-1:-1;;;;;784:31:1;;774:42;;764:70;;830:1;827;820:12;764:70;667:173;;;:::o;845:254::-;913:6;921;974:2;962:9;953:7;949:23;945:32;942:52;;;990:1;987;980:12;942:52;1013:29;1032:9;1013:29;:::i;:::-;1003:39;1089:2;1074:18;;;;1061:32;;-1:-1:-1;;;845:254:1:o;1478:328::-;1555:6;1563;1571;1624:2;1612:9;1603:7;1599:23;1595:32;1592:52;;;1640:1;1637;1630:12;1592:52;1663:29;1682:9;1663:29;:::i;:::-;1653:39;;1711:38;1745:2;1734:9;1730:18;1711:38;:::i;:::-;1701:48;;1796:2;1785:9;1781:18;1768:32;1758:42;;1478:328;;;;;:::o;2182:180::-;2241:6;2294:2;2282:9;2273:7;2269:23;2265:32;2262:52;;;2310:1;2307;2300:12;2262:52;-1:-1:-1;2333:23:1;;2182:180;-1:-1:-1;2182:180:1:o;2367:186::-;2426:6;2479:2;2467:9;2458:7;2454:23;2450:32;2447:52;;;2495:1;2492;2485:12;2447:52;2518:29;2537:9;2518:29;:::i;2558:1259::-;2964:3;2959;2955:13;2947:6;2943:26;2932:9;2925:45;2906:4;2989:2;3027:3;3022:2;3011:9;3007:18;3000:31;3054:46;3095:3;3084:9;3080:19;3072:6;3054:46;:::i;:::-;3148:9;3140:6;3136:22;3131:2;3120:9;3116:18;3109:50;3182:33;3208:6;3200;3182:33;:::i;:::-;3246:2;3231:18;;3224:34;;;-1:-1:-1;;;;;3295:32:1;;3289:3;3274:19;;3267:61;3315:3;3344:19;;3337:35;;;3409:22;;;3403:3;3388:19;;3381:51;3481:13;;3503:22;;;3553:2;3579:15;;;;-1:-1:-1;3541:15:1;;;;-1:-1:-1;3622:169:1;3636:6;3633:1;3630:13;3622:169;;;3697:13;;3685:26;;3766:15;;;;3731:12;;;;3658:1;3651:9;3622:169;;;-1:-1:-1;3808:3:1;;2558:1259;-1:-1:-1;;;;;;;;;;;;2558:1259:1:o;4030:693::-;4141:6;4149;4157;4165;4173;4181;4189;4242:3;4230:9;4221:7;4217:23;4213:33;4210:53;;;4259:1;4256;4249:12;4210:53;4282:29;4301:9;4282:29;:::i;:::-;4272:39;;4330:38;4364:2;4353:9;4349:18;4330:38;:::i;:::-;4320:48;;4415:2;4404:9;4400:18;4387:32;4377:42;;4466:2;4455:9;4451:18;4438:32;4428:42;;4520:3;4509:9;4505:19;4492:33;4565:4;4558:5;4554:16;4547:5;4544:27;4534:55;;4585:1;4582;4575:12;4534:55;4030:693;;;;-1:-1:-1;4030:693:1;;;;4608:5;4660:3;4645:19;;4632:33;;-1:-1:-1;4712:3:1;4697:19;;;4684:33;;4030:693;-1:-1:-1;;4030:693:1:o;4728:260::-;4796:6;4804;4857:2;4845:9;4836:7;4832:23;4828:32;4825:52;;;4873:1;4870;4863:12;4825:52;4896:29;4915:9;4896:29;:::i;:::-;4886:39;;4944:38;4978:2;4967:9;4963:18;4944:38;:::i;:::-;4934:48;;4728:260;;;;;:::o;4993:380::-;5072:1;5068:12;;;;5115;;;5136:61;;5190:4;5182:6;5178:17;5168:27;;5136:61;5243:2;5235:6;5232:14;5212:18;5209:38;5206:161;;5289:10;5284:3;5280:20;5277:1;5270:31;5324:4;5321:1;5314:15;5352:4;5349:1;5342:15;5206:161;;4993:380;;;:::o;6765:222::-;6830:9;;;6851:10;;;6848:133;;;6903:10;6898:3;6894:20;6891:1;6884:31;6938:4;6935:1;6928:15;6966:4;6963:1;6956:15;7889:127;7950:10;7945:3;7941:20;7938:1;7931:31;7981:4;7978:1;7971:15;8005:4;8002:1;7995:15

ipfs://f9221047f81107a47d745e0114193f5e18da21d6a4466aa8f47a4e7ad5061ca6